If i'm bore siting my new scope which has MOA torrents. Do I sight it in like a normal scope by just adjusting the torrents or d

[zf51910]

If i'm bore siting my new scope which has MOA torrents. Do I sight it in like a normal scope by just adjusting the torrents or do you do it different?

[Edward J. Palumbo]

Remove the turret caps or covers to access the windage & elevation adjustments. Whether Mil-Dot or fraction-of-an-inch graduations, align the optical axis of the scope with a distant, specific point. The process is the same, but the value of the adjustments yield slightly different results. I hope your scope & rifle combination serves you well.

[DakotaMan]

It's the same process regardless of the turret graduations. Center the target in the bore with the rifle in a vise or solid rest. Crank the turrets until the cross hair is in the center of the target at 100 yards or half inch below at 50 yards.

[Amflyer]

Another trick for more accurate bore-sighting is to place a deprimed case in the chamber, narrowing down the "aperture"