Top Ad

Collapse

Announcement

Collapse
No announcement yet.

I'm mounting a Minn kota Edge bow mount trolling motor on an aluminum v-hull. It seems like you have to take out 4 screws, 2 on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • red30
    replied
    Yes, I also had to do this. If I recall correctly, I had to loosen or remove these in order to get the mounting bolts in. Then I put them back in. It seems like they are there to prevent the mounting bolts from backing out, but that's just my guess. It didn't seem like they served any other purpose.

    BTW, I hope you have better luck than me with your directional indicator (arrow). Mine stopped turning -- it's useless. So, I opened up the top and tried to re-align all the gears and parts to make it work. It worked for about 15 minutes on my next trip, but then gave out again. It's really, really annoying to have it not working. I can only tell what direction my motor is pointing by turning it on and seeing where it pushes me (really frustrating when fishing in fast current like on Upper Potomac river). If it wasn't for that, I'd be very happy with my Minn Kota Edge.

    Leave a comment:


  • Kkeltic
    replied
    Make that six screws, three a side.

    Leave a comment:


  • I'm mounting a Minn kota Edge bow mount trolling motor on an aluminum v-hull. It seems like you have to take out 4 screws, 2 on

    I'm mounting a Minn kota Edge bow mount trolling motor on an aluminum v-hull. It seems like you have to take out 4 screws, 2 on each side of the plastic motor guide on the front of the bracket to install some of the mounting bolts. Has anyone had to do this?

Welcome!

Collapse

Welcome to Field and Streams's Answers section. Here you will find hunting, fishing, and survival tips from the editors of Field and Stream, as well as recommendations from readers like yourself.

If this is your first visit, be sure to check out the FAQ for information on posting and navigating the forums.

And don't forget to check out the latest reviews on guns and outdoor gear on fieldandstream.com.

Right Rail 1

Collapse

Top Active Users

Collapse

There are no top active users.

Right Rail 2

Collapse

Latest Topics

Collapse

  • Reply to Hydrostatic Shock
    by DakotaMan
    Franchi, you can get HSM 25-06 Rem ammo loaded with the 75g Hornady VMAX bullet going at 3600 fps. That is enough velocity to let you experience hydrostatic...
    Today, 01:26 PM
  • Hydrostatic Shock
    by MattM37
    Any thoughts on the phenomenon of hydrostatic shock? I don't know enough about rifle-shooting to have an opinion. Always found it interesting, though....
    07-16-2021, 11:45 AM
  • Reply to Burn Rates
    by Ernie
    One thing to remember is that even when you are using a powder like H-4350, you can have lot to lot variations, and that is true of any brand of powd...
    Today, 12:55 PM
  • Burn Rates
    by jhjimbo
    Read a article recently discussing Burn Rates of smokeless powder. One comment he made is not all the charts are in agreement. I thought just the opposite...
    07-24-2021, 07:05 PM
  • Reply to Well Equipped
    by MattM37
    It's money spent for something active, anyway. I'm always amazed at what collectors pay for a certain stamp or coin or something that's just going...
    Today, 12:13 PM

Right Rail 3

Collapse

Footer Ad

Collapse
Working...
X